Archive | Reloading

Tags: , ,


Posted on 21 October 2010 by Cork Graham

On October 10, 2010 (that’s right, 10/10/10), a pioneer crossed the summit between this world and the next. If you’re a firearms and reloading enthusiast, you probably knew his name. If you are a hunter, you should.

John Nosler, 97, was a hunter, engineer, innovator, and pioneer in the field of bullet-making—he was a self-made man. Like any self-made man who has been successful, he understood the importance of relationships—no one has ever become successful being a loner.

Nosler’s personal telephone book over the years included some of the other vanguards of the firearms industries, some of them very well-known because of their writing, like Elmer Keith, Jack O’Connor and Chub Eastman (he wrote the memoir’s foreword), some remembered through their own mark in the bullet and reloading industry: Fred Huntington, founder of RCBS; Hornady founder Joyce Hornady; and Speer Bullets founder Vernon Speer, to name a few.

This was a history not only of cartridge and rifle component making, but the story of America pulling itself out of dire economic straits and moving through what many might call the heyday of American might and wherewithal.

At the open of the book, the reader is introduced to John Nosler as a child in Southern California. It’s a wonderful vignette to how most of America was very much rural, and that surburban was a term to come about after the major industrial push into cities after World War II, with the resulting need for workers to not completely lose that connection to the wilds.

In the second chapter we learn about Nosler’s love of all things mechanical, often roadsters and rifles. This natural interest in machines led to his employment at the Ford Motor Company. Through Ford, John Nosler arrived in Reedsport, Oregon: not the place to try selling autos during the Great Depression, much less immediately after an influx of labor unions and a major layoff at the local lumber yard.

A job change and start of a trucking company quickly ensued. The center of Shakespeare Theater on the West Coast, an idyllic western town that drew my own grandmother to live with her aunt immediately after the loss of her parents in a murder-suicide in Chicago in 1914; Ashland, Oregon also, later drew the Nosler family and would become the initial headquarters of the Nosler Partition Bullet Company in 1948.

What were few opportunities in Southern California for deer hunting were replaced with a plethora of deer, elk and black bear in Oregon. A love for shooting was supported well at the Ashland Gun Club, an environment supportive of healthy understandings of firearms and shooting.

Nosler moved its headquarters to Bend in 1958, incorporating in 1960 into what we recognize with distinction as Nosler Bullets, Inc. Bend was very smart in offering incentive to Nosler, which would be a very beneficial venture for Nosler and the local populace.

The Bullet

To think that the famous Nosler Partition Jacket Bullet that has led to the improved kill ratios on big-game around the world came about as the result of John Nosler’s almost losing a moose on one of his earlier hunts in British Columbia, a time when a hunting trip up to Canada could be as challenging as a safari in Africa during its peak in the late 1920s and early 1930s, of which Ruark and Hemingway wrote.

Banking on his own intellectual resourcefulness that led him to a number of successes at Ford, and his own trucking company, in positions that most people now couldn’t apply for without a university degree, Nosler designed his Partition and created the company that has brought about so many innovations in bullet design over the last sixty-two years.

John Nosler: Going Ballistic – The Life and Adventures of John Nosler, a memoir that came about through many hours of Gary Lewis’s recorded interviews with John Nosler in 2003, goes into much more depth than could ever be captured of a man’s life in a magazine article, even the designing of the bullets that have become the crowning glories of the company, such as the Nosler Partition that started it all, the Zipedo, a bullet offering I didn’t even know about until I read the book, the Ballistic Tip, which I shot my first blacktail with near California’s Lake Almanor in the mid-1980s, and the bullet that has quickly become one of my favorites, if not my favorite, the Nosler Accubond, marrying the best qualities of Nosler’s offerings: the accuracy of the Ballistic Tip, and the penetration and energy delivery to the animal’s vitals of the Nosler Partition.

Nosler seems to have been part of many firsts of my life. Just last Saturday, I used the Accubond to shoot my first California mule deer in Modoc County. The shot wasn’t ideal  (only offered a view of the buck’s rear, with the deer looking back over its shoulder, ready to take off straight away from me at 200 yards), but with my Model 70 Super Grade solid on shooting sticks, I took the shot, confident that if I didn’t hit the spine with my ½ MOA rifle, by using the base of the tail as a target, the bullet would still do its job.

When we got to the buck that expired within 10 yards of where it had been hit, I was delighted at how the .270 caliber 130 gr. Accubond bullet had done what it was supposed to: deliver high shock and deep penetration. It was a tricky shot and one that could have really made a mess. As it was, by the time I butchered the buck after four days aging in my garage, I not only had a completely undamaged liver that I had collected the evening of the shot, but had lost only a little bit of meat on the right inside of the buck’s ham, an inch from the base of the tail, to bloodshot where the Accubond entered. NOTE: I’d never have attempted such a shot without confidence in my shooting ability based on years of practice, or using a bullet I wasn’t sure would so efficiently retain its weight, mushrooming in a timely manner to deliver such lethality so far into the chest.

I’ve been impressed and continue to be impressed by the offerings John Nosler envisioned and I’m sure we’ll continue to see more as the next generations carry the Nosler flag—a legacy I’m delighted and honored to have had a peek into through the well-written, entertaining and informative John Nosler: Going Ballistic – The Life and Adventures of John Nosler.

For your daily commute on your MP3 player – Click the Play Button now, or Download and Enjoy Author Gary Lewis’s interview, along with snippets of Lewis’s interviews of John Nosler, on Cork’s Outdoors Radio:


Tags: , , , ,

Reloading Restart (Part One) [Radio Interview]

Posted on 26 August 2010 by Cork Graham

Introduced to reloading by my father as a young teen in the late 1970s, wanting to best improve the accuracy of my first bolt-action biggame rifle, a 7mm Remington Magnum Model 700 BDL, I created my first hunting loads customized to that rifle. Aside from years overseas, I returned to reload again in the early 1990s. Then, in 1994, I became an outdoor writer, writing a weekly column for the pre-ANG buy out The Times of San Mateo County, and all my reloading experience basically went out the window.

As you might imagine, when you become a gun writer or hunting writer, you get a lot of ammo to test, and I mean A LOT. It gets pretty crazy with all the bullet grains, powder charges…one who follows the belief that you pick a good load and bullet and really learn how to shoot it well, my shooting success plummeted…though on many more hunts than I’d ever gone as an average hunter, game was getting scarce in my freezer.

Now it was definitely not from want of accuracy from the ammunition I was getting to shoot. For one who was trained and deployed as a sniper, it was just all the variations in cartridges within a week. One of the reasons snipers can seem almost magical in the types of shots that can be pulled off is because of a deep relationship you form with your rifle, understanding how your body acts and reacts to the process of shooting and the deep knowledge gained from shooting a certain load: over, over, and over again.

With all the improvements in factory-loaded ammunition over the years, except for the very fine-tuning of taking a rifle from under 1MOA to half or quarter MOA, factory ammo was shooting nearly as well as my reloads. I just started making shorter shots, keeping them less than 350 yards. But, now that I’m writing more and more to show the efficacy of ethical long-range shooting as a tool of wildlife management and conservation, custom reloading is mandatory for long shots.

You can get match ammo, such as that made for the military and law enforcement, but they come with bullet types inappropriate for anything other then puncturing a military/law enforcement target’s armor or exploding the back end of said target’s melon.

If you want to get better than 1/2 MOA accuracy to ethically and confidently take long shots, or just be sure that you rifle is shooting the absolute best load for that specific rifle in your gun safe, and have a bullet designed for taking down game, reloading is the way to go!

Forgotten Fears

Like getting on a bike after way too many years, all those parental warnings about reloading (rightfully taught so that you don’t get lazy and do something really stupid, like loading a double charge of powder) came rushing back. But, like all warnings, these are just to make sure that you pay attention when you’re reloading.

That’s means no smoking or drinking. It means that when you’re reloading, no TV in the background or for some, not even any music that might put you into a too relaxed state of trance remembering you’re girlfriend or boyfriend that you were dating when you first heard the song—when you should be paying full attention to what you’re doing at the reloading bench…

No Distractions!

Do that, and read the latest reloading manual to refresh your memory, or get you started, and you’ll do all right…

Nothing worse for fine powders than a greasy, unkempt platform…

Keep It Clean

Remember that your reloading success is based on non-variations within load groups. This means not only making sure you keep a consistency within a group of loads, bullets sizes, shapes and age of brass. It also means keeping your work area clean. Nothing throws off continuity and consistency than a dirty work place.

This means keeping clutter down. When you setup your area, make sure everything is going to be in the same neat place. I have my workstation set up to work from right to left.

Measuring devices and powder are on the left side of the surface area, in the middle are the cartridge trays and primers, and the bullets are on the right, near the reloading press.

Most all make sure that all grease and particle-collecting material is removed from the equipment. For example, Robin Sharpless, Exec. VP at Redding-Reloading, advises to take some Hoppe’s to the metal inside area of the powder throw that will come in contact with your gunpowder. Wipe it down with a clean paper towel again.

For the plastic tube run a dryer sheet, yes, the same one for your laundry, through it. This will keep the static down, and keep powder form sticking to the insides of the tube.

Keep your whole working area, neat and clean.

With all the dies available, it’s time to bring out the old rifle you didn’t think you could get ammo for!

Money Savings

Many become reloaders because they want to reduce costs. This is especially true now as litigation by anti-gun and anti-hunting organizations add to the pricing of ammunition, either through outright increased taxation and legal defense fees. Or, as in the Condor Range of California, by requiring non-lead ammunition, much more expensive to produce when production costs are kept down by product conformity: changing between copper jacketed projectiles and non-lead production, and even coming up with new non-lead alternatives is costly just in itself.

It all comes down to money in this society, and it’s good when reloading can lead to savings. According to RCBS Product Line Manager Kent Sakamoto and Chris Hodgdon, Public Relations Manager at Hodgdon Powders, the savings can run up as much as 40 percent.

As Sakamoto says, there are savings to be made, but what happens is that you end up spending the same amount, it’s just that you get much more for your money. Instead of 100 rounds, you get to shoot 140 rounds.

Personally, I’m in it for the accuracy and it helps that the savings are definitely there!


What About My Old Stuff?

My start began with a classic Lee Handloader, then we graduated to a mishmash of RCBS and Lyman presses and accessories. The greatest trepidation in getting back into reloading often is that much of the equipment would be so outdated that it won’t fit or work with any of the new releases.

As long as you stay with the same manufacturer, this isn’t the case. You should be able to use the new accessories or major purchases with the older equipment. Not only that, but you might even be able to use equipment across brand lines.

This hit home when I realized that I didn’t have a Redding shell holder, but the RCBS shell holder served the purpose in a heartbeat.

Now many in the manufacturing business might think this is nuts—how are you going to make any money if some products are interchangeable with another? As one who has been furious with a number of printer manufacturers over the years, because they always want to corner the printer ink market (what are you going to do when you can find the specific ink cartridge for your specific printer is no longer available, as often has happened?)  I’m a loyal customer of companies who simply rely on turning out a great product and just leave it to the customer to respect a customer/provider relationship based on longevity nurtured by reliability.

It’s an old relationship started with RCBS years ago, and now being nurtured through Redding-Reloading, whose great line of products of also speak for themselves. They build products that work efficiently and you can trust not to fall apart after only a few years of use. Most importantly, they understand and respect the idea of product compatibility….wouldn’t it be cool if every shotgun had the same thread and fit, so that canyou  focus on the best choke for your shotgun and duty, instead of what’s available to fit your specific brand of firearm?

STARS AND STRIPE FOUNDATION SIDE NOTE: As you may recall from last week’s post, I was on my way to the Stars and Stripes Foundation Celebrity Shoot. The Chuck Mawhinney-signed sniper’s rifle kit is still being raffled HERE.

Vietnam and Hollywood Veteran Steve Kanaly and CSM Mark Christianson checking out the Chuck Mawhinney-signed longrange tactical kit with matching serials numbers.

More Worthwhile Information

Below you’ll find two strings of interviews with representatives of RCBS and Hodgdon Powders. There is another great interview in part two of this article with Redding-Reloading. It’s worthwhile information for getting back into reloading after a long hiatus. And if you’re just thinking of getting into reloading, I’m sure you’ll gain a lot more from listening to these specialists.

For your daily commute on your MP3 player – Download and Enjoy RCBS Kent Sakamoto and Hodgdon Powders Chris Hodgdon’s interviews on Cork’s Outdoors Radio:


 Continue to Part Two to listen to Redding-Reloading’s Robin Sharpless, after listening to the informative interviews below on this page: view Part Two

Comments Off on Reloading Restart (Part One) [Radio Interview]


Reloading Restart (Part Two)[Radio Interview]

Posted on 26 August 2010 by Cork Graham

(cont’d from Part One )


You Don’t Have to Go Big

Getting started can be daunting. Often this is because you’ve probably read the same books and magazines as I have, with a photo of the author’s reloading bench. What’s frequently missing is the disclaimer at the bottom of the photo stating the writer had started building their grand reloading station over 30 years ago.   

Now, if you have the money and the space, like a quarter of your basement or garage, by all means! If you’re like me, where space is a high commodity, you can build a pretty effective reloading bench from something as simple as a mini-bookcase. A few little alterations and customizations and you might even be doing better than a large, immovable behemoth of a reloading bench.   

With some suggestions from RCBS’s Kent Sakamoto, I mounted an RCBS Accessory Base Plate on a 2×10 piece of lumber and then, because of cross-compatibility, mounted a Redding-Reloading Ultra-Mag Reloading Press on the base plate with bolts and washers provided, also screwing a Redding Master Powder Measure into the side of the plank.   

Repeating the same with an RCBS Rock Chucker Supreme mounted on the base plate on another plank, I now have the ability to adapt to a number of upcoming planned articles on reloading. If you’re ever heard the term “Two is one and one and none”, you’ll greatly appreciate this setup.   

All you have to do is untighten the C-clamp and trade one press system for another. Also, for an upcoming piece on field reloading, I can easily take the second press with proper dies and relaod ammuntion right at the site of hunting or shooting range…just like I used to do for troutfishing, bringing a flytying kit to the streamside.   

Most importantly, with an elegant white motif to the bookcase and compact size, I have an excellent setup for anyone living in an apartment, or anywhere that space is hard to find.   

NOTE: If you’d like to build a large tradtional reloading bench, as designed by the National Reloading Manufacturers Association, click here to DOWNLOAD 

Family Affair

Finally, in what better scenario, other than actually being out in the field, can you build a deeper relationship with your son, daughter, wife or husband in shooting? This is very serious stuff we’re talking about. Screw up the process and someone’s going to hurt, either at the reloading bench or at the range.   

If you and your children don’t really communicate, you will be by the time you’re done with your first round of reloading. You’ll be communicating well, checking to make sure that every cartridge is properly charged with the correct amount of powder. Brass resizing instructions will be made clear. Even making sure that right primers have been used will be second nature.   

Then, when you’re done, your loved ones will have something tangible in their ammo boxes, ready to find out what kind of load gives the best grouping at the range. You’ll also have read one of the many books on reloading to just be sure, such as those printed by Speer, Sierra, Nosler, Lee, and Hornady.   

Remember to get a Reloading Manual!

You’ll have taken the steps and following them to the letter, you’ll have a finished reloading collection of rounds to take to the range and check to find the best combination for your rifle. Then, you’ll reload a full box with your latest recipe.   

You and your loved ones will head out into the woods in search of that elusive bear, pig, deer or whatever is your local wildgame of choice, and you’ll make a perfect hit. The animal will suffer its least painless possible death because of speed and efficiency of kill. Then, you’ll begin the butchering process for your family table’s bounty.   

Rewarding is an understatement. I still remember the first buck I shot with a cartridge I reloaded myself, just as dearly as the first trout, steelhead and salmon caught on a fly I tied myself.   

Much More Information

Below you’ll find an interview with a representative of Redding-Reloading. It’s worthwhile information for getting back into reloading after a long hiatus. And if you’re just thinking of getting into reloading, I’m sure you’ll gain a lot more from listening to the specialists and in part one of this article.   

You may have noticed there are some advanced pieces of equipment stored in my bench photos, that go beyond normal entry into reloading. In futures articles I’ll be writing about how to best use them and get a level of accuracy out of your bullet that is impossible to get from mass produced ammunition…unless you spent many thousands of dollars on a case of custom ammo!   

Visit these fine manufacturers to review their latest quality offerings:   

For your daily commute on your MP3 player – Download and Enjoy Redding-Reloading Robin Sharpless’s interview on Cork’s Outdoors Radio:

Comments Off on Reloading Restart (Part Two)[Radio Interview]


  • Advertise Here
    Advertise Here