Glass it’s all about the glass. That’s what everyone tells you about picking an excellent rifle scope. The problem is that to really appreciate what that means, you need to take it out into the field. 

Sure, you can see across the sporting goods store and see what a mounted elk or deer looks like, quartered by the reticle. You can even walk outside and check the scope in natural light out on the street. But, it’s the evaluating in the field that really tells of the quality of a scope you’ve put on your rifle. And, contrary to what you may think I find that that when checking glass, it’s not the long shots that indicate glass quality, but the close ones in the brush.

This is for two important reasons: clear definition of reticle against distraction, such as branches and vines; and light transmission in low-light conditions. What I was reminded on a pig hunt in Northern California awhile back is that the RR-600-1 3-9X42mm Rapid Reticle scope not only has an impressive lens system, but everything about the scopes is high quality and of excellent durability. Were this scope available twenty years ago, it would have easily been in the $2,500 to $3,500 range. That was before prices dropped because China got into the market with some very good components and opened opportunities for a number of scope manufacturers over the years.

What PFI has done is stay true to the “high quality at a reasonable price” philosophy that scope manufacturers on the Pacific side followed as compared to the heavily unionized competitors in Europe, who charge an arm and leg for optics that if it weren’t for their two-to-three-hundred-year-old brand doing the selling the price would be much, much lower. PFI stuck to standards of glass that negated China, and remained true to Japanese glass. No one in Asia, or most of the rest of the world for that matter, makes glass as good as the Japanese. Anyone who has ever had to work professionally with a camera can attest to that, whether your loyalties fit Nikon or Canon.  Like all good scopes, the PFI glass is multi-coated: contrary to the myths perpetrated by German and Austrian scope sales reps in the 1980s and early 1990s, that many gun writers bought into, it’s the lens and types of lens coatings that improve your ability to see in twilight, not whether you’ve got a humongous objective bell and a 30 mm tube. There are reasons for a 30 mm but they revolve more around adjustments than use once the scope is set…especially if you don’t need to make  turret adjustments, like come-ups, on a more traditional long-range scope.

The tube is black anodized 6061 T6 aluminum tubing, which is not only strong but light. But, as I say, what is it about PFI that makes their scopes unique and above so many? It’s the reticle.

The innovative and fast RR-600 Rapid Reticle

If you were introduced to long-range shooting in the military post-Vietnam, likely you went through some training in mildot. It was a number of calculations to determine angles and distances. It was not fast, even for the fastest. The Rapid Reticle on the other hand, is fast and accurate!

Their reticle design is based on the premise that a variety of cartridges deliver a bullet trajectory that can be grouped with others. For example, a 150gr. .30-06 is similar to a 150gr.  .308 Winchester, and a 150gr. .280 Remington.  Based on this premise, John Pride and Mickey Fowler, both winners of the Bianchi Cup, designed the Rapid Reticle to not only provide ranging, but also ballistic drop compensation. What they did that was innovative, getting away from the way it was normally done with mildot for range estimation and turret come-ups for compensating for bullet drop.

They took trajectories and grouped them. For the RR-600 it was a number of common hunting rounds. For the RR-800 and RR-900, it was a collection of trajectory compatible military rounds used in the military sniping community. From this data, they designed a reticle for each line of scopes that enables the shooter to simply adjust for drop by laying the range-corresponding stadia line on the target. Though the RR-600 doesn’t have range estimation, the RR-900 does. This was accomplished was by integrating the Rapid Ranging system.

The Rapid Ranging system is based on the average head being nine inches tall. By measuring a nine-inch target with the bracket system on the RR-CQLR-1, or the head-and-shoulder Rapid Ranging system on the RR-900-1, you can easily discern your target’s distance. Reports from the hunting field and the battlefield have been excellent: a number of endorsements which are on their site. It’s a scope that that can be used to get an SDM (squad designated marksman) qualified for long-range shooting in a fraction of the time that it would take get a sniper qualified on the standard milidot and turret system.

Not only a good looking and functioning scope system, it’s just plain simple.  And when there’s a lot of stress, as in combat, or even the jitters that might hit a hunter during that moment of truth, the better it is to not have to fiddle with a lot of things like calculations and making sure you gone through the process of doing your come-ups. It’s one thing to be on a hunt when you’re calm and in charge of time. It’s another when your team has been ambushed and you’re suddenly on counter-sniper detail: the Rapid Reticle and Rapid Ranging system earn their bars on this one.

Three-shot groups for 200 yards, 300 yards, and 400 yards at 100 yards for a .280 Remington

So simple, all you have to do with the RR-600 is sight it in at 200 yards, check for 400 yards, and you’re ready to go. I sighted in for 200 yards at 100 yards and then walked my rounds up the paper to see the variations per each stadia line. As a kid with his first 4-plex-reticled scope back in the late 1970s, the innovations in the market have been stupendous, but not in a long while has a manufacturer come out with something as fast, accurate and durable as the Pride Fowler Industries Rapid Reticle line of scopes.

Happily, you won’t have to make sure you’ve got change in your pocket, either! Don’t you just hate being at the range and realizing after searching your pocket that you’ll have to ask some next to you if they’ve got change, or you’ll have to use one of the screwdrivers that becaue of its shape will automatically scratch or mar the notch in the top of the turret in order to make elevation and windage adjustments to get zeroed? The designers at PFI made sure that all you have to do is unscrew and remove the turret covers and adjust by turning the adjustments with your fingers–now how sensible and forward-thinking is that? I’m still wondering who in the world was the ning-nong who came up with the penny or dime slots for getting your scope on target.

No more digging in your pockets for change!

Also, as everyone knows, wind can kill a good shot. The RR-600 stadia line lengths help compensate for left and right winds up to 10 miles per hour.

That’s not to say that when you’re out in the field you can extend the range of your “hail Marys”. What it does enable is the opportunity to make very accurate shots out at ranges well within the capabilities of your round, such as 200 to 500 yards. It’s something I’m looking forward to reporting further on this fall.

To get your own RR-600, order directly through their website: www.rapidreticle.com  

For your daily commute on your MP3 player – Download and Enjoy the interview of Pride Fowler Industries Vice President Richard Nguyen, on Cork’s Outdoors Radio:

Bill Skinner, a freelance cameraman for CNN, CBS and a number of other media organizations, had finished his latest contract shooting for the US State Department in Afghanistan. So, getting away to enjoy one of his passions, tactical-style firearms, was a nice respite. There were the Armalites, Colts, Springfield Amory, Browning offerings—I ran through a nice .308 offering from Armalite that I’ll look forward to trying in the field for wild boar in Texas. After a few well-placed shots into the metal targets at Springfield Armory’s range with what is a sweet-shooting version of the 1911, the Range Officer, we walked up the hill to Winchester’s display of the new Razorback XT, in .223 Remington and .308 Winchester.

Because of how the proliferation of AR-15 style rifles have inundated the market, and been effectively used in the battle against the overpopulation of ole Mr. Razorback in states like Texas, what better decision than to release a powder and projectile match as these rounds with a proper bullet to rip through hog hide and gristle and reach the vitals in a large pig?

The Armalite offering for wild boar?

The Razorback XT .223 round was released in a 64-grain bullet, while the .308 version is delivered in a 150-grain. Some might think that a .223 round is a little too light for feral pig hunting, but up to 200 yards, this round does it job. For someone who hunts most of his feral hogs in California, and often in the lead-free zone of Central California, the non-lead attributes of the Razorback XT is a God send! It is specially designed to not start deforming until after having pierced the hog’s armor. Now, all we have to do is get around the legal restrictions of the AR-10 and AR-15 design in California, which is laughable.

…Right after putting a number of Razorbacks down range, Skinner and I nwent over to the shotgun range to check out the latest release of Winchester’s wildly successful Blind Side.

An impressive, light load that patterns well!

This year they’re releasing a #5-shot load in 2-3/4-inch shell, along with a #2-shot load. From the way it patterns it looks like a great round to get those ducks in the 25 to 40-yard range…my favorite for shooting over decoys. Check out the latest episode of Cork’s Outdoors TV below:

On October 10, 2010 (that’s right, 10/10/10), a pioneer crossed the summit between this world and the next. If you’re a firearms and reloading enthusiast, you probably knew his name. If you are a hunter, you should.

John Nosler, 97, was a hunter, engineer, innovator, and pioneer in the field of bullet-making—he was a self-made man. Like any self-made man who has been successful, he understood the importance of relationships—no one has ever become successful being a loner.

Nosler’s personal telephone book over the years included some of the other vanguards of the firearms industries, some of them very well-known because of their writing, like Elmer Keith, Jack O’Connor and Chub Eastman (he wrote the memoir’s foreword), some remembered through their own mark in the bullet and reloading industry: Fred Huntington, founder of RCBS; Hornady founder Joyce Hornady; and Speer Bullets founder Vernon Speer, to name a few.

This was a history not only of cartridge and rifle component making, but the story of America pulling itself out of dire economic straits and moving through what many might call the heyday of American might and wherewithal.

At the open of the book, the reader is introduced to John Nosler as a child in Southern California. It’s a wonderful vignette to how most of America was very much rural, and that surburban was a term to come about after the major industrial push into cities after World War II, with the resulting need for workers to not completely lose that connection to the wilds.

In the second chapter we learn about Nosler’s love of all things mechanical, often roadsters and rifles. This natural interest in machines led to his employment at the Ford Motor Company. Through Ford, John Nosler arrived in Reedsport, Oregon: not the place to try selling autos during the Great Depression, much less immediately after an influx of labor unions and a major layoff at the local lumber yard.

A job change and start of a trucking company quickly ensued. The center of Shakespeare Theater on the West Coast, an idyllic western town that drew my own grandmother to live with her aunt immediately after the loss of her parents in a murder-suicide in Chicago in 1914; Ashland, Oregon also, later drew the Nosler family and would become the initial headquarters of the Nosler Partition Bullet Company in 1948.

What were few opportunities in Southern California for deer hunting were replaced with a plethora of deer, elk and black bear in Oregon. A love for shooting was supported well at the Ashland Gun Club, an environment supportive of healthy understandings of firearms and shooting.

Nosler moved its headquarters to Bend in 1958, incorporating in 1960 into what we recognize with distinction as Nosler Bullets, Inc. Bend was very smart in offering incentive to Nosler, which would be a very beneficial venture for Nosler and the local populace.

The Bullet

To think that the famous Nosler Partition Jacket Bullet that has led to the improved kill ratios on big-game around the world came about as the result of John Nosler’s almost losing a moose on one of his earlier hunts in British Columbia, a time when a hunting trip up to Canada could be as challenging as a safari in Africa during its peak in the late 1920s and early 1930s, of which Ruark and Hemingway wrote.

Banking on his own intellectual resourcefulness that led him to a number of successes at Ford, and his own trucking company, in positions that most people now couldn’t apply for without a university degree, Nosler designed his Partition and created the company that has brought about so many innovations in bullet design over the last sixty-two years.

John Nosler: Going Ballistic – The Life and Adventures of John Nosler, a memoir that came about through many hours of Gary Lewis’s recorded interviews with John Nosler in 2003, goes into much more depth than could ever be captured of a man’s life in a magazine article, even the designing of the bullets that have become the crowning glories of the company, such as the Nosler Partition that started it all, the Zipedo, a bullet offering I didn’t even know about until I read the book, the Ballistic Tip, which I shot my first blacktail with near California’s Lake Almanor in the mid-1980s, and the bullet that has quickly become one of my favorites, if not my favorite, the Nosler Accubond, marrying the best qualities of Nosler’s offerings: the accuracy of the Ballistic Tip, and the penetration and energy delivery to the animal’s vitals of the Nosler Partition.

Nosler seems to have been part of many firsts of my life. Just last Saturday, I used the Accubond to shoot my first California mule deer in Modoc County. The shot wasn’t ideal  (only offered a view of the buck’s rear, with the deer looking back over its shoulder, ready to take off straight away from me at 200 yards), but with my Model 70 Super Grade solid on shooting sticks, I took the shot, confident that if I didn’t hit the spine with my ½ MOA rifle, by using the base of the tail as a target, the bullet would still do its job.

When we got to the buck that expired within 10 yards of where it had been hit, I was delighted at how the .270 caliber 130 gr. Accubond bullet had done what it was supposed to: deliver high shock and deep penetration. It was a tricky shot and one that could have really made a mess. As it was, by the time I butchered the buck after four days aging in my garage, I not only had a completely undamaged liver that I had collected the evening of the shot, but had lost only a little bit of meat on the right inside of the buck’s ham, an inch from the base of the tail, to bloodshot where the Accubond entered. NOTE: I’d never have attempted such a shot without confidence in my shooting ability based on years of practice, or using a bullet I wasn’t sure would so efficiently retain its weight, mushrooming in a timely manner to deliver such lethality so far into the chest.

I’ve been impressed and continue to be impressed by the offerings John Nosler envisioned and I’m sure we’ll continue to see more as the next generations carry the Nosler flag—a legacy I’m delighted and honored to have had a peek into through the well-written, entertaining and informative John Nosler: Going Ballistic – The Life and Adventures of John Nosler.

For your daily commute on your MP3 player – Click the Play Button now, or Download and Enjoy Author Gary Lewis’s interview, along with snippets of Lewis’s interviews of John Nosler, on Cork’s Outdoors Radio:

You may be asking what a review on a sniper instructional book is doing in an outdoors magazine dedicated to effective wildlife conservation practices and game and fish cooking. What you might be missing is how the path of hunter to sniper has returned to hunter in the last ten years. It’s evident in the camouflage and even the equipment being used in the hunting community.               

Hunter, Sniper, Hunter 

Major Plaster uses the phrase “Close to the Earth” to describe that quality about the best snipers from around the world. This refers to the fact that almost all the best snipers, certainly the most recognized, had younger years based in the country, with a solid hunting background. Whether Russian snipers who hunted wolves in Siberia, or Austrailians who shot kangaroos, or American snipers who were raised hunting elk, deer and squirrels, all the highly regarded snipers had a solid background learning woodcraft in their youth.              

How does this pertain to you, the hunter, just trying to do better in field? A lot!               

In the last twenty years, the hunting community has benefited greatly by the equipment that has been developed for the sniping community. Previously, it was the sniping community that benefited most from what the hunting community provided. There’s this cycle that seems to have come completely around, where techniques and equipment gained through hunting were brought to the sniper schools of past: and now, the equipment and knowledge that is used in sniping has come full circle back to hunting…and anything you can do to be that more efficient in taking your game, lessening the chances of crippling or loss, is a level of effectiveness to reach for–good wildlife management and conservation practices demand it.              

One of the easiest ties to recognize are the camouflage improvements to hunting clothing, advances in the military that were picked up and improved upon in the hunting community. There are also the improvements in rifles that make it almost a foregone conclusion that if you’re purchasing a new bolt-action rifle from a reputable manufacturer, you can pretty much expect it to shoot under 1 MOA.               

A review of writings by Jack O’Connor would quickly tell you that in the 1930s and before WWII a rifle that shot 1.5 MOA was pretty good. And we’re not even talking yet about shooting technique and optics, of which the improvements in binoculars and laser rangefinders has been amazing! Sometimes snipers can even make good optical equipment purchases  through the civilian hunting market because the advances have come so fast in this hunter focused market—driven by a market that wants the best and has the money to pay for it.               

And let’s not forget those skills taught snipers that every hunter can benefit from knowing and practicing: attention to detail, personal and environmental awareness; and  rifle, optics, and cartridge knowledge, and finally, but never least important–marksmanship.               

The Ultimate Sniper

Of all the books out there, that takes a reader from the most basic skills to the most advanced, the latest updated and expanded the 2006 release of The Ultimate Sniper rises to the top. A large book with 573 pages, everyone of them worthwhile. It was written and compiled by sniper instructor and lecturer Major John L. Plaster, USAR (ret.), whose prior experience with MACV SOG in Indochina and starting a number of highly regarded sniper schools, are well-known.               

Even though the sniper’s instructional tome is directed toward military and law enforcement snipers, there is so much information that applies to your hunting improvement. Here are just  few of what  The Ultimate Sniper covers.               

Basic and Advanced Marksmanship

If only these sections were taught to everyone who picks up a rifle. In the basic section, Plaster writes about sniper attitude, proper sight picture, shooting positions and breath control, and one shot sighting in. With the advent of the Caldwell Lead Sled, I’ve found this to be one of the easiest to perform.               

When Plaster gets to the advanced marksmanship techniques, there’s information in there that will improve your shooting skills immensely.               

Get Support

I’ve lost count of how many hunters I’ve seen miss because they just brought their rifles up and fired off-hand. How much more venison would have ended up in a hunter’s meatlocker had they used a better shooting rest?               

A sniper is always aware of the best shooting position, always on the lookout for the rifle rest. This can be as simple as shucking a backpack and dropping it down the ground to lay the rifle over (one of my favorites if the ground permits) or dropping to a sitting position—many drop to a knee, when a sitting position is much more stable…              

Bring shooting sticks with you. Plaster shows you how to make your own. You can make them long or short. I carry a foot-long tripod made with wooden dowels in my hunting pack, and also carry a set of Predator-styx slung across my shoulder with a thin bungee cord. At a moments notice, you’ll have a much better shooting rest than an offhand shot could ever be.               

That’s not to say I won’t take a quick shot at something close in the brush, or even running from an offhand position. But, it takes a lot of practice to do what is called “snap shooting.” Major Plaster co-produced and hosted an excellent video called The Ultimate Rifleman, which was directed specifically toward the hunter, and where he taught how best to prepare for a running shot on big-game. If you happen to find an old copy, snatch it up—you can find quite a bit of that type of information in the The Ultimate Sniper DVD that Major Plaster still produces.               

Excellent skills deteriorate rapidly…if you come away from these sections on marksmanship with only one thought, it should at least be: practice, practice, practice!               

Breath and Squeeze

The art of marksmanship is covered in great detail and every hunter will be well-served by rereading the sections dedicated to the integrated act of shooting. Using a chart and graph, Plaster reveals major components of excellent marksmanship: breathing, and trigger control, integrated with good body position and scope picture.               

Like in archery, shooting a rifle requires follow through. If we all had to hunt with flintlocks like our ancestors, the importance of follow-through would be that much more apparent to the average shooter. Keep your eye on the target, sights on the desired bullet impact point, and a solid stockweld.               

Know Your Round

One of the best things you can do toward improving your shooting skills is knowing what your bullet does in flight. I do this two ways, actually going to the range and shooting at 25 yard increments out to 600 yards with my hunting loads. Also, I use my ballistic software (I have copy of the Nightforce Ballistic Program that has a collection of factory rounds cataloged and the ability to type in values from a chronograph) to get a pretty good idea of travel of my bullets in their arch. I sight most of my rifles in at 1.5 inches high at 100 yards. If I run across a really close buck and want to shoot it in the neck, I aim a bit lower…little adjustments that can make a great difference when you know what your bullet’s doing in its travel.               

BLACKHAWK!®'s Pro Marksman Folding Ammo Pouch with two windows for checking your dope before your shot, along with the sliderule style Mildot Master.

Expanded Awareness 

Kim’s is a game that was first described in the story Kim, written by Rudyard Kipling. It’s a game that was taught to Kim when he was being trained to spy. It’s a game in a variety of forms that’s taught to spies and snipers and anyone involved in intelligence gathering. Its purpose is to improve memory skills. Attention to detail is also covered in it, which to a hunter is very useful.               

Plaster has included a sniper’s version of the Where’s Waldo visual puzzle. I suggest using the Where’s Ivan as an example and sketch a herd of deer with a small buck and medium-sized buck and monster buck scattered within the herd. Then, give time limits to you and your friends to pick out bucks, and then try remembering where exactly they are in relation to the rest of the deer in the group.               

Then, when you’re out in the field, scan for deer and remember what qualities there are in deer, or whatever your prey–what makes them stand out against the landscape? During archery season, and early rifle seasons, in the West, this is easy, as the red-brown and light brown hides of deer really stand out on green grass and foliage. Against the snows of winter, or the dry brown grass, a deer’s darker winter hide really stands out.               

Train your subconscious to pick out inconsistencies. One of the best sighting techniques I was taught as a teen was to look for horizontal lines. Aside from the horizon, Nature normally stretches out in vertical lines, tree trunks rising to the sun, and hillsides washing downhill. When you see horizontal lines on a hillside, like the back of a deer, cougar, pig, elk, bear, or cow, it’s very apparent when you’re looking for it!  And how many of us have looked at a group of rocks, suddenly seen one of them shapeshift into a wild boar on the hoof, before running off? Pay attention…and use your optics!             

Wind and Range

One of the most confusing for many hunters is estimating for wind and range. There are so many things in the environment that because of size, position, and distance can drastically effect a hunter’s ability to estimate distance: inclines, declines, objects much larger than your target. They’re all covered in this section of the The Ultimate Sniper.               

And you might be surprised how much wind can effect your bullet even at ranges under 400 yards…but I’ll leave that to the reading.               

Close to the Earth

One of the most important points to take is that about how the best snipers had a connection to the earth that went way back to their childhoods. From all parts of the world that has turned out some of the most impressive snipers (Australia, Scotland, Russia and the US) most of them had a hunting and woodcraft background that started in childhood. Close to the earth has relevance in a number ways. It’s the background of snipers, like Vasili Zaitsev (hunted wolves and wild boar in Siberia), Chuck Mawhinney (hunted elk and deer back in Oregon) and Carlos Hathcock (hunted squirrels and other game for the table), all well-grounded in a youth of hunting and learning wood craft. It’s the deep inner knowledge of how we are related to the earth, how we standout, and how we can blend in with this earth.               

It’s also the level of awareness that almost seems psychic in its ability to detect and enable a sniper to be two or three moves ahead of the target. It’s almost innate in someone who was introduced to firearms as a hunter, as compared to just a competition shooter. Remember that the German sniping instructor sent by Hitler to hunt down Zaitsev was better equipped, but Zaitsev relied on his “cunning” as the Germans liked to comment, and is carried in the Soviet sniper’s motto: “While invisible, I see and destroy.”               

Major Plaster puts forward a hypothesis that the reason there were hardly any well-trained snipers in the Iraqi Army during what would have been a great environment for snipers, the trench warfare during the Iraq-Iran War, goes out without a blip because an Arab society that historically had a reputation for longrange shots, was by modern times devoid of them because of an enmasse move of the hinterland population into urban areas–like in so many other parts of the world. They basically lost cultural skills instilled and developed through years of pre-service experience in the country.               

By improving your woodcraft as a hunter, you will increase the number of successes while hunting. Every hunter would be best aided by reading the chapter on stalking and movement. Addressing “The Wall of Green” as the author calls it, is most often hard for new and experienced hunters: much like a stream fisherman who fishes an ocean coast for the first time and doesn’t know how to read the coastline for fish. It’s overcoming this, using the scanning tactics described by Plaster, that has led me to shoot a number of deer and feral pigs in their beds. You can see an example of this, when I’m picking out a wild boar that is only 10 yards away from me in deep brush in this episode of Cork’s Outdoor TV.               

If you’ve ever had failures sneaking up on those open-land antelope in Wyoming and Arizona, the section on stalking will be very helpful.               

Get The Ultimate Sniper, read it, apply the techniques, read it again and see how you might improve or modify the information for your own environment…no matter your present level, I’d be surprised if your skills didn’t improve—and get out there and practice, practice, practice!               

Get your copy here: 

• Ultimate Sniper 
• Palladin Press

Tips and Techniques directly from the Master

Major John Plaster is well represented on two websites. As an advisor at Millet Sights, he has written a number of articles to help the shooter. He has his own http://ultimatesniper.com, where he offers his books and has a shipload of information, not the least of which are pdf scans of historical books going back to mid-1800 printings about sniping. In the following broadcast of Cork’s Outdoor Radio we talk about some of the tips. This one would be helpful to a lot of hunters by helping undersand what your bullet can and can’t do—even if you can shoot that far, depending on what cartridge you’re using, you might not want to based on the information in this brief: TERMINAL BALLISTICS               

For your daily commute on your MP3 player – Download and Enjoy MAJ John L.  Plaster’s interview on Cork’s Outdoors Radio:

Rabbits reside in the past memories of many as their introduction to hunting. Rabbits remind me of the elation of returning to the US after spending a childhood in South Vietnam and Singapore—where the only ones with guns were government personnel and guerrillas, and most of the hunting happening was of the two-legged variety.  

With a 16 gauge Marlin pump handed down to me by my father, who had last used it before he went off to lay down telephone lines across Latin America in the late 1950s, I ventured forth to Arroyo Seco in Los Padres National Forest. As I wasn’t old enough to drive, it meant that it was a family affair and we didn’t get to the forest during the optimum morning times, and left before the best evening times to make it back to the Bay Area before dark.  

One day, though, I got lucky. Our dog, that must have been a mix between either a beagle or Spaniel and a terrier, who loved to dig and chase, suddenly got onto a small cottontail that bolted and I shot.  

I only hit it with a few pellets, and not knowing how to finish it off with my hands, I simply stepped back and aimed again. Problem was that I didn’t really understand chokes and how I had to walk much further, else turn that small brush cottontail into hamburger.  

The experience almost turned me off hunting all together—I still don’t like to hunt small game with a shotgun, but more for not having to pick shot out of my meal. But then the next year, I got a Marlin semi-automatic .22 rifle with a tubular magazine!  

Even with the issued open sights, I could drill a rabbit through the head, wasting none of what would become my favorite meal. No more stray pellets puncturing the stomach or gall bladder, tainting the sweet cottontail meat…like chicken but so much tastier. It’s no wonder that my natural progression in adulthood would be back to the rifle that I was a introduced to shooting with in the first place: a pellet gun.  

Without all that “bang” that comes with gunpowder, I’ve come to enjoy the silence of hunting with a bow that in the world of rifles is most imitated by an air rifle. It’s really fun shooting a pellet rifle for a number of reasons: the ammo’s cheaper, it’s quieter, there’s an unlimited amount of propellant (we breath it every second) and there’s no smoke preventing you from keeping an eye on the target.  

For this reason the airgun was used extensively during the 1600s and 1700s for  hunting. In war, Napoleon saw the major effect of the quiet airgun, un-affected by rain, against his troops, that he had a standing order that all enemy combatants captured with an airgun in possession be executed on the spot.  

My Wyoming huntin' buddies Gerald Gay (l) and James Rivera (c) and bison taken with a .61 cal air rifle

As a fanatic small-game hunter with a taste for large cottontails, I’ve learned the merits of putting a .22 caliber pellet rifle through it paces. While last year was my introduction to the break barrel offerings of Crosman, this year I plan to put their scoped Benjamin Marauder through a number of hunts!  

The Marauder, a rifle that uses an air reservoir much like ancient rifles, is similar to the AirArms rifle that airgun aficionado James Marchington uses on his own hunts for rabbits in his homeland of the UK, hunting in England and the Isle of Skye. A few months ago, I had the pleasure of watching his DVD release (I think I’m even the first one to get it in NTSC, instead of PAL).  

As Marchington stated in our interview that follows, technology has come a long way: how much easier it is to teach by producing a DVD as compared to publishing a book. And what an entertaining lesson it is in his production: Rabbits — Airgun Hunting With James Marchington!  

Through a number of nicely shot scenes, the viewer is taught how to choose an effective pellet rifle, and type of scope to mount. In the field, some of it shot on the beautiful and very rustic Scottish Isle of Skye, Marchington takes the audience through a number of sighting and shooting sessions.  

The topics also touch on clothing (which I especially enjoy because he’s not wearing camouflage, but a good hunting tartan) and go in-depth into the skills of stalking and using the terrain to get close to the rabbit. If there’s ever a DVD to get for a child to show them something they can easily go hunting for, which would teach them to hunt just about every other game, this is it!  

So much out there is directed toward the adult, and really doesn’t cover the hunting opportunity of rabbits in a way that I’m sure will appeal to the neophyte hunter, young or adult. Those rifles mentioned are definitely “adult” pellet rifles, and Marchington stresses the important of all types of good woodcraft and rifle stewardship.  

Marchington makes a great teacher and yet another reason I highly suggest getting a copy to watch with your son or daughter.  

As for the hunting in the field (it’s not all about picking equipment and talking about woodcraft), Marchington mounted a Guncam on the rifle so that the viewer can see exactly what the shooter is seeing as he shoots. Very impressives footage and shows how effectively a .22 pellet rifle can dispatch a large rabbit as quickly as a rifle shooting a .22 long rifle cartridge.  

To get your copy visit www.marchington.com  

For your daily commute on your MP3 player – Download and Enjoy James Marchington’s interview on Cork’s Outdoors Radio:

 Topics:  

Track 1: James Marchingon talks about his entry in hunting in the Great Britain, and how much stalking rabbits is a great training aid for learning to hunt large game.  

Track 2: James Marchington touches on the topics of rabbit game species, air rifle options and new upcoming DVD productions for hunters.

Cork Graham sighting in the WOTAC 4-14×50

 With only a couple months until California’s coastal deer opener, it was time to not only check out the new custom loads received from Nosler, but also the Wonders Tactical (WOTAC) 4-14×50 scope (4th generation) I’d been given by their sales rep, Forrest Ebert. Just yesterday, I learned that I’d been lucky in the special deer draw with an X3B tag, so I’ll not only be hunting with the WOTAC scope for the first time, but also using it on my first California mule deer…good hunting luck on my side, I hope.  

My first trials at the range were excellent. The glass is very clear, and the elevation and windage knobs turn easily without that mushiness scopes made in Asia can have. A number of target shooters had requested louder clicks to them, and WOTAC has made those improvements.  

First trained on the MilDot reticle in the military, I was actually very impressed with the EPB reticle. For really long shots, those over 1,000 yards, I’d still recommend doing “come-ups” with the turrets (1/4 click MOA adjustments). But, for ranges under 1,000 yards, I can see how just raising or lowering, using the small hash marks along the main verticle line of the crosshair can be very easy and accurate.  

Easy to use turrets and parallax correction

It was very fast to get on target with the adjustsment and longer hash mark at the bottom easily aids shooting for a crosswind. Would I use this scope to shoot an animal at 1,000 yards? No. Would I shoot a deer at 600-700 yards? Absolutely!  

Ethical long range shooting will be covered in a later article, but you don’t have to start adjusting for elevation until 300-plus yards on a modern high-velocity rifle, a move from 300-600 is not that much of a challenge, especially if you’ve been practicing—and it’s all about practice!  

What the hash marks (each represents a shift in 2MOA) do is make quick elevations using the reticle that much more effective. Let’s the take the new rifle I’ll be using this year. Sighted in at 200 yards, there’s a 68.8-inch drop at 600 yards with the 130 gr. Nosler Accubonds out of my .270 Winchester Model 70 Super Grade.  

The EPB Reticle

All I have to do is check the wind speed (let’s say an afternoon 10 mph crosswind from the right). Then, raise the rifle so that sweetspot at the deer’s shoulder is halfway between the fifth and sixth hash mark. Compensating for wind, move the rifle muzzle to the right, so that target center is two and a half hash marks to the left (4.75MOA) of the vertical crosshair.  

This is done with the scope zoom ring set to MOA. There is also a mark on the zoom ring for MIL.  

Either MOA or Milliradian

What I don’t like about the scope are the turret screws. They are too small and always worry me that I’ll strip them in trying to make sure they’re tight. I’ve already read reports of stripped heads. Best would be to either have the turrets locked in with one larger screw, or to have a flip-lock system as can seen on the Premier Reticle scope.  

Now it’s not a US Optics, Premier or Nightforce scope (And you know how much I love my Nightforce Optics™ 3.5-15×56mm NXS with MilDot!). It’s also not priced in the thousands of dollars like them, either. Like those higher-end scope manufacturers, Matt Wonders, the owner of WOTAC, offers a solid guaranteed. If you’re not happy with your WOTAC scope, contact them within 14 days of receiving it and they’ll either replace the scope or give you a total refund!  

For a scope that provides good glass, an excellent reticle design that can efficiently turn your highpower 300 yard rifle into a consistent 600-700 yard shooter, it’s a very good deal at $329. If you’re looking to get a scope that you can accurately adjust your crosshair in the field for longrange shooting,  the WOTAC 4-14X50 is an excellent scope to start with.  

Looking forward to putting it through its trials on a real hunt instead of just at the range! 

For more information, or to order your own, contact Wonders Optics Sales Representative Forrest Ebert at email: ebco2009@gmail.com  

For your daily commute on your MP3 player – Download and Enjoy the latest news at Wonders Optics (WOTAC) on Cork’s Outdoors Radio:

TOPICS: Wonders Optics Sales Representative Forrest Ebert talks about the history of Wonders Optics line of tactical, target and hunting rifle scopes.